Adjusting Manual Chin Control; Adjusting Extremity Control Joystick - Invacare Bora Series User Manual

Hide thumbs Also See for Bora Series:
Table of Contents

Advertisement

Fig. 5-19 Graphic serves as an example.
1. Loosen screw A.
2. Position joystick on nucleus.
3. Tighten screw.

5.6 Adjusting Manual Chin Control

WARNING!
Risk of Injury or Death
Small parts can lead to choking hazard that may
result in injury or death.
– Do not remove any small parts.
– Closely supervise children, pets or people with
physical/mental disabilities.
CAUTION!
Risk of Injury and Damage
Remaining burrs and missing end caps after
modifications on rods, such as shortened rod, can
lead to injury or damage.
– Deburr cut after cutting excessive length.
– Re-install end cap after deburring.
– Check end cap for tight fitting.
1528224-Y

5.6.1 Adjusting Extremity Control Joystick

Adjusting Joystick Orientation
The joystick can be turned through 360 degrees. A slot on
the side allows you to angle the joystick at 90 degrees.
1. Loosen hand screw A.
2. Turn underpart of joystick to position slot.
3. Adjust joystick orientation. If desired, lock joystick in 90
degree angle in slot.
4. Tighten hand screw.
Adjusting Position on Holder
5/32 inch Allen key
Fig. 5-20
Setup
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xtr series

Table of Contents