Adjusting The Length Of The Legrest; Adjusting The Depth Of The Calf Pad - Invacare Bora Series User Manual

Invacare® Bora/Spectra XTR Series
CAUTION!
Risk of injury due to incorrect adjustment of the
footrests and legrests
– Before and during every journey it is imperative
to ensure that the legrests contact neither the
castor wheels nor the ground.
The electrically height-adjustable legrests are operated using
the remote. Refer to the separate user manual for your
remote for more information.

5.18.3 Adjusting the length of the legrest

CAUTION!
Risk of injury due to incorrect adjustment of the
footrests and legrests
– Before and during every journey it is imperative
to ensure that the legrests contact neither the
castor wheels nor the ground.
• 10 mm wrench
72
1. Use the wrench to loosen the screw (1).
2. Adjust to the desired length.
3. Re-tighten the screw.

5.18.4 Adjusting the depth of the calf pad

The depth of the calf pad can be adjusted via the holding
plate. The holding plate hole combinations allow 5 different
depth settings.
• 10 mm wrench
1. Use the wrench to loosen the nut (1) and remove.
2. Adjust to the desired depth. Observe that the round
holes are intended for the calf pad retaining screw and
the oblong holes for the aglet without thread.
3. Screw the nut back on and tighten.
1528224-Y