Table of Contents
Advertisement
Invacare® Bora/Spectra XTR Series
The screws that allow width adjustment of side-mounted
legrests are located under the seat (1).
1. Loosen the screws using the open-end spanner.
2. Adjust the legrest to the desired position.
3. Re-tighten the screws.
5.22 Legrests for the Firm seat
5.22.1 Modifying the front seat depth by adjusting the
legrest support brackets
The seat depth in the front can be modified by adjusting
the position of the legrest support brackets. Adjusting the
position of the legrest support brackets is the same for all
types of legrests.
Tools:
•
1 x Allen key 4 mm
78
1. Loosen the grub screw (1), using the Allen key.
2. Release the wing screw (2).
3. Set the position of the legrest support bracket to the
desired depth.
4. Re-tighten the screws.
5.22.2 Adjusting the length of the legrest — Standard /
Junior / Mini Legrests (Firm seat)
CAUTION!
Risk of injury due to incorrect adjustment of the
footrests and legrests
– Before and during every journey it is imperative
to ensure that the legrests contact neither the
castor wheels nor the ground.
Tools:
•
1 x open-ended spanner 13 mm
1528224-Y
Hide quick links:
Advertisement
Table of Contents
