Adjusting The Trunk Support; Adjusting The One Arm Drive; Mounting The Drum Brake - Invacare XLT User Manual

One arm drive antitipper
D
●○○
Difficulty:
Attach the adapter plate C to the antitipper with the screws A.
1.
2. Attach the antitipper with adapter plate to the rear wheel
attachment D with the screws and washers B.

12.17 Adjusting the trunk support

The trunk support can be swung away or lifted out of its holder. The
height, depth and sideways positions are easy to adjust.
Adjusting the height
B A
●○○
Difficulty:
Slacken the screws A.
1.
2. slide the holder B up or down to the required position.
3. Re-tighten the screws.
or:
1. Remove the outer screws D on the attachments.
2. Move the bracket up or down to the required position.
3. Re-tighten the screws.
Adjusting the depth
●○○
Difficulty:
Open the zip on the cover to reach screws E.
1.
2. Slacken screws.
3. Adjust the trunk support to the desired position.
4. Retighten screws and close the zip.
1512799-A
C
A
Tools: 4 mm and 5 mm Allen key
C
D
Tools: 4 mm Allen key
A
Tools: Screw driver
Adjusting the angle
●○○
Difficulty:
1. Remove the cover on the arm of the trunk support to reach
the screws and nuts.
2. Slacken the screws and nuts.
3. Adjust the desired angle using the three joints.
4. Secure tightly the screws and nuts and reattach the cover.

12.18 Adjusting the one arm drive

The hand rims can be positioned either level with each other (internal
position) or with the inner, smaller hand rim protruding slightly
(external position).
Changing the position of the hand rims
A
●○○
Difficulty:
Unscrew the three screws A.
1.
2. Remove the hand rim and turn it over.
3. Put it back into position and firmly retighten the three screws.
CAUTION!
Risk of injury
– Take care when removing the telescopic transmission
shaft B. Point it away from the body when releasing
the powerful spring.
The transmission shaft is an integral part of the wheelchair
and the user will be unable to propel the wheelchair without
it.

12.19 Mounting the drum brake

●●●
Difficulty:
Tools: 5 mm Allen key / 13
mm fixed spanner
B
Tools: 5 mm Allen key
Tools: 4 mm and 5 mm Allen keys
/ 10 mm fixed spanner
Service
53