More About Multi-Point Measurement - Konica Minolta CL-200A Instruction Manual

More about Multi-Point Measurement

Setting the Head ID Numbers
● Be sure to set unique ID numbers for all heads. If you set the same number on more than
one head, the CHROMA METER will not be able to carry out measurements correctly.
About Color-Difference Measurement
● The target values must be set separately for each head.
● Results are shown separately for each head.
Use of Correction Factors (CFs)
● Use or nonuse of CFs can be set on and off separately for each head.
About Digital Output
● If your are outputting to a printer through the D-OUT port, the CHROMA METER outputs
the currently selected head. You can print out data for other heads by changing the head
selection.
About Printing
● When [ /D-OUT] is pressed, the readout on the display of the currently selected head is
sent to the printer. You can print out data for other heads by changing the head selection.
39