Burkert 8025 Series Operating Instructions Manual page 14

Power supply 115/230 V AC
• frequency
• supplied voltage
• current
• integrated protection
• power
Current consumption (without the consumption of the
4-20 mA output)
• version without relays, energized with 12-36 V DC
• version with relays, energized with 12-36 V DC
• version without relays, energized with 115/230 V AC
• version with relays, energized with 115/230 V AC
transistor output Do1
• type
• function
• frequency (f)
• Electrical data
• duty cycle if 0,6 < f < 300 Hz
• duty cycle if 300 < f < 1500 Hz
• duty cycle if 1500 < f < 2200 Hz
• protection
relay outputs (Do2 and Do3)
• operating
• electrical data of the load (non UL devices)
• electrical data of the load (UL devices)
• max. breaking capacity
• life span
current output Ao1
• specification
• max. loop impedance
12
English
Type 8025 UNIVERSAL
Technicaldata
• 50/60 Hz
• 27 V DC, regulated
• max. 250 mA
• 250 mA time delay fuse
• 6 VA
• 60 mA (at 12 V DC) and 30 mA (at 36 V DC)
• 90 mA (at 12 V DC) and 45 mA (at 36 V DC)
• 40 mA
• 55 mA
polarized, potential-free
• NPN / PNP (wiring dependent), open collector
• pulse output (by default), user configurable
• 0,6-2200 Hz
• 5-36 V DC, 100 mA max., voltage drop 2,7 V DC at
100 mA
• > 0.45
• > 0.4
• < 0.4
• galvanically isolated, and protected against overvol-
tages, polarity reversals and short-circuits
• hysteresis (by default), user configurable, normally
open
• 230 V AC / 3 A or 40 V DC / 3 A
• max. 30 V AC and 42 V peak or max. 60 V DC, 3 A
• 750 VA (resistive load)
• min. 100000 cycles
• 4-20 mA, sink or source (wiring dependent), 22 mA
to indicate a fault (can be activated)
• 1300 W at 36 V DC, 1000 W at 30 V DC, 750 W at
24 V DC, 300 W at 15 V DC, 200 W at 12 V DC
• 900 W if the device is energized with 115/230 V AC