Wiring The Relay Outputs Do2 And Do3 Of The Panel Or A Wall-Mounted Version - Burkert 8025 Series Operating Instructions Manual

Set of selector E depending on the value of the power supply.
SOURCE SINK
CURRENT
BINARY
Univ Iout
(AO1)
Batch
NC
PE
ISOG
DO4
DI4
DI3
L+
DI2
DI1
2.2K
SUPPLY
- +
NC COIL
1 2 3 PE
FLOW
SENSOR
Figure 23: PNP wiring of the DO1 transistor output of a wall-mounted version, 115/230 V AC
7.4.9 Wiring the relay outputs Do2 and Do3 of the panel or a
wall-mounted version
Insert the supplied stopper gaskets into the unused cable glands to ensure the tightness of the device.
• Unscrew the unused cable gland.
• Remove the transparent disk.
• Insert the supplied stopper gasket.
• Screw the nut of the cable gland.
28
L+ L- PE P- P+
Supply PULSE
12..36Vdc DO1
PE PE PE
SENSOR
+5V
SENSOR TYPE
(L+)-12V
COIL NPN/PNP
470
39K
DO2
DO3
English
Type 8025 UNIVERSAL
Installationandwiring
E
5 6 7 8 9 10
Connection of the power supply
for the 8025
PLC
+
5-36 VDC
-
+
-
Power supply for the PLC
L N L N