Details Of The Process Level; Details Of The Parameters Menu - Burkert 8025 Series Operating Instructions Manual

Type 8025 UNIVERSAL
Operatingandcommissioning
8.5

Details of the process level

This level is active by default when the device is energized.
12.6 L/MiN
0......9
16.45 MA
87654 L
231 L.
8.6

Details of the parameters menu

To access the Parameters menu, simultaneously press keys
This menu comprises the following configurable parameters:
The displayed flow rate is set to 0 (a dot is displayed after the
flow rate units when the funntion CUT-OFF is active) because
or the measured flow rate is below the threshold value defined in
0 L/MiN.
the "CUT-OFF" parameter of the Parameters menu. See chap.
"8.6.16".
Value of the measured flow rate, displayed in the unit chosen in the "UNIT" parameter
of the Parameters menu.
Value of the current output, proportional to the measured flow rate.
Value of the main totalizer, volume of fluid counted by the device since the last reset.
Value of the daily totalizer (identified by a dot after the volume units), volume of fluid
counted by the device since the last reset.
Resetting the daily totalizer.
+
0......9
> 2 s
ENTER
for at least 5
s.
English
37