Maintenance And Troubleshooting; Safety Instructions; Cleaning The Device; If You Encounter Problems - Burkert 8025 Series Operating Instructions Manual

Type 8025 UNIVERSAL
Maintenanceandtroubleshooting
9

mAINTENANcE AND TRoUbLEShooTING

9.1

Safety instructions

danger
risk of injury due to electrical voltage.
▶ Shut down the electrical power source of all the conductors and isolate it before carrying out work on the
system.
▶ Observe all applicable accident protection and safety regulations for electrical equipment.
Warning
risk of injury due to non-conforming maintenance.
▶ Maintenance must only be carried out by qualified and skilled staff with the appropriate tools.
▶ Ensure that the restart of the installation is controlled after any interventions.
9.2

cleaning the device

The device can be cleaned with a cloth dampened with water or a detergent compatible with the materials the
device is made of.
Please feel free to contact your Bürkert supplier for any additional information.
9.3

If you encounter problems

9.3.1

Resolution of problems when the device status LED is off

Device current
status output
leD Ao1
OFF 0 mA
output Do1 message
and/or Do2 displayed
and/or Do3
not switched OFF
possible cause recommended action
→
The device is not Check the wiring.
energized.
→
Check the fuse of the installation
and replace it if necessary.
→
Check that the installation is not
shut-down.
→
Check that the power source is
working properly.
English
59