Height Limit Setting - Known Height - PROLEC PME200 User Manual

8.1.2 Height Limit Setting - Known Height

Enter a value
Press the 'Enter a value' button
Cancel without change
Moves highlighter to
left/ Hold to delete digit
Accept displayed value
Use the UP and DOWN arrows to increase and decrease the highlighted number. Use
the LEFT and RIGHT arrows to move the highlighter to the left and to the right.
that the current limit activates at the set point. The restriction cannot be de-
activated if in the alarm state. Observe the operational limitations given in
section 4.
562200-000, Issue 1.2, December 2015
A known limit can be entered into the display. This is
the vertical height from the ground or base of the ma-
chine:
Once a limit is set, the internal alarm will sound and the RED LED
will light if the equipment exceeds the current limit. Always check
Exit to previous menu
Increases highlighted
digit
Moves highlighter to
right
Decreases highlighted
digit
29 of 62