Using The Display - PROLEC PME200 User Manual

5.2 Using the Display

The display is operated by using the buttons adjacent to the function icons. The buttons
can open a sub menu, turn a function ON or OFF, set a value, toggle through multiple
screens, no one button has a single function. The icon will turn black/purple when the
button has been activated. Icons can be assigned for Supervisor use only, to access
them enter the supervisor code or use the supervisor key switch (if fitted), see section
5.4. Note that the side view of the machine shown in PME200 is fixed and does not follow
the movement of the machine.
Multifunction buttons:
The action of the button is
indicated by the adjacent
icon.
A secondary symbol can appear in the top left corner of an icon, these mean:
The plus symbol indicates a sub menu will be opened if selected.
The cycle symbol indicates that multiple features are available.
The on / off symbols indicate if a feature is ON or OFF. Red is ON and
grey is OFF.
Help is available for each button. To access the
help, push and hold the icon button for three sec-
onds. The help screen can be cleared by pressing
any of the six buttons. PME is still actively monitor-
ing when displaying help messages, therefore any
alarm or warning condition will still be indicated
within this feature.
562200-000, Issue 1.2, December 2015
12 of 62