Taking Product Out Of Operation; Service And Repair; Maintenance Review - PROLEC PME200 User Manual

16 Taking Product out of Operation

17 Service and Repair

PME has very few user serviceable parts. The safety controller has internal fuses that, in
the event of a blown fuse, can be replaced. The service section describes daily, monthly
and yearly checks that must be carried out to ensure safe operation of the system.

17.1 Maintenance Review

Due to nature of the PME system operating environment, changes in usage can occur.
Prolec Ltd must be notified of any changes in the pattern of use of the system for consid-
eration.
Any alterations or modifications to machine components which affect the system must be
reported to Prolec Ltd or via the service agreement holder.
To aid in the use of PME, all appropriate technical bulletins relating to PME are to be as-
sessed and implemented as appropriate. This information is available from Prolec Ltd.
Prolec Ltd must be informed of any Prolec system component failure. Be it directly or via
the service agreement holder.
Technical consultation is available to the user, contact Prolec Ltd or the service agree-
ment holder.
Prolec Ltd
25 Benson Road
Nuffield Industrial Estate
Poole Dorset BH17 0GB
562200-000, Issue 1.2, December 2015
Prolec Limited is committed to complying with the upcoming European
Directive of RoHS (Restriction of Certain Hazardous Substances) and
WEEE (Waste from Electrical and Electronic Equipment). PME is sub-
ject to the WEEE directive, therefore PME or any component must be
returned to Prolec Ltd for correct disposal or recycling.
The display and safety controller are fitted with internal batteries and
must not be disposed of in landfill.
Telephone +44 (0) 1202 681190
Fax +44 (0) 1202 677909
Email service@prolec.co.uk
59 of 62