Product Type Selection Menu (Optional); Pme 2D Digging (Optional) - PROLEC PME200 User Manual

6.2 Product Type Selection Menu (Optional)

This system can be calibrated for multiple Product Types. If more than one
Product has been activated, they can be manually selected via the product
screen shown below. Use the Arrow icon buttons to select the required prod-
uct and confirm using the Tick icon button, the system will restart automati-
cally. Ensure the correct equipment is fitted to the machine when selecting a
product. Example products are shown, please refer to the relevant product operator
manual for further instructions.
Exit without change

6.3 PME 2D Digging (Optional)

PME2D offers all the features you'd expect from a 2D guidance product providing accu-
rate and quick grade control in common civil engineering applications. Pre-set profiles
allow you to dig to depth or grade to a known profile first time without under/over cutting,
saving you time, rework and excess material. Tool addition and measurement, choosing
and editing of slopes, cross sections, trenches and simple grading is simple to do all from
the display.
Any existing PME system can be upgraded to 2D digging with the addition of simple soft-
ware and hardware changes.
562200-000, Issue 1.2, December 2015
Moves highlighter UP
Accept highlighted
system
Moves highlighter
DOWN
16 of 62