Stability Indication Overload - PROLEC PME200 User Manual

7.4 Stability Indication Overload

With the Lifting Mode active, if the load is greater than 105% of the maximum
safe working load the system will warn the machine is close to the lifting capacity
at the current height and radius. The system indicates an overload condition via
internal and external alarms in con-
junction with visual indicators on the display -
no motion is cut.
7.4.1 Hydraulic Limit Indication
If a particular lift is limited by hydraulic capacity rather than stability, the directional indica-
tor on the articulation in question will have a
likely to occur at short radii. The system indicates a hydraulic limitation condition via
internal and external alarms in conjunction with visual indicators on the display - no mo-
tion is cut.
In the event of an approach to overload or an overload condition, the lifting
point should only be moved in a direction that increases the safe working
562200-000, Issue 1.2, December 2015
load. See section 4 for further information.
If the load is greater than 105% of the
maximum safe working load
The load capacity indicator will be red

The red LED will flash

The internal and external alarm will

sound
The message shown here will be

displayed
Unsafe motion is indicated by RED

arrows, safe motion is indicated by
GREEN arrows
RED border. Hydraulic limitation is more
19 of 62