8.4 Low Limits
8.4.1 Low Limit Menu
Turns monitoring
ON
and OFF
Enter a value
Set low limit using cur-
rent lowest of equip-
ment
Using the Low Limits Menu, the low limit can be switched ON and OFF, a low limit can be
set to a known value, or the low limit can be set to the current lowest point.
See sections 8.4.2 to enter a known low and section 8.4.3 for setting the limit by moving
the machine.
that the current limit activates at the set point. The restriction cannot be de-
activated if in the alarm state. Observe the operational limitations given in
section 4.
562200-000, Issue 1.2, December 2015
A low limit can be set by entering a known height on the keypad
or by manually moving the machine to the desired limit.
Current lowest point. Only displayed if
a Low limit is set.
Once a limit is set, the internal alarm will sound and the RED LED
will light if the equipment exceeds the current limit. Always check
Exit to previous menu
43 of 62