Lift Mode Menu; Lifting Point Selection - PROLEC PME200 User Manual

7.7 Lift Mode Menu

The Lifting Mode function has various features which may be available if con-
figured at installation. The configuration will depend on the operating proce-
dures of the machine owner. If only one duty, lifting point and or tool has been
calibrated, the relevant icon will not be displayed.

Lifting point selection

Displays load chart
7.8 Lifting Point Selection
low. Use the arrow buttons to select the required lifting point and confirm using the TICK
button. Example lifting points are shown in the listing.
Exit without change
Multiple lifting points allow different lifting capacities to be achieved, altering the lifting
point will not affect the current duty selected (See section 7.9).
562200-000, Issue 1.2, December 2015
The current lifting point is indicated on Lifting Mode screen. The
system can be calibrated with just one lifting point for use in any
duty. If more than one lifting point has been calibrated, it will be
manually selected via the lifting point selection screen shown be-
Exit to previous screen
Moves highlighter UP
Accept highlighted
system
Moves highlighter
DOWN
22 of 62