Max Radius Limit - PROLEC PME200 User Manual

8.2 Max Radius Limit

8.2.1 Max Radius Limit Menu
Turns monitoring
ON and OFF
Enter a value
Set max radius limit
using current furthest
part of equipment
Using the Max Radius Limits Menu, the max radius limit can be switched ON
and OFF, a max radius limit can be set to a known value, or the max radius
limit can be set to the current farthest point.
See sections 8.2.2 to enter a known max radius and section 8.2.3 for setting
the limit by moving the machine.
that the limit activates at the set point. A limit cannot be deactivated when
close to or at the limit. Observe the operational limitations given in section 4.
562200-000, Issue 1.2, December 2015
A max radius limit can be set by entering a known radius or by
manually moving the machine to the desired limit.
Current furthest point. Only displayed if
a max radius limit is set.
Once a limit is set, the internal alarm will sound and the RED LED
will light if the equipment reaches the current limit. Always check
Exit to previous menu
33 of 62