Min Radius Limit - PROLEC PME200 User Manual

8.3 Min Radius
8.3.1 Min Radius Limit Menu
Turns monitoring
ON and OFF
Enter a value
Set min radius limit us-
ing current nearest
part of equipment
Using the Min Radius Limits Menu, the min radius limit can be switched ON
and OFF, see sections 8.3.2 to enter a known min radius and section 8.3.3 for
setting the min radius by moving the machine.
that the current limit activates at the set point. The restriction cannot be de-
activated if in the alarm state. Observe the operational limitations given in
section 4.
562200-000, Issue 1.2, December 2015
A min radius limit can be set by entering a known radius on the
keypad or by manually moving the machine to the desired limit.
Current nearest point. Only displayed if
a min radius limit is set.
Once a limit is set, the internal alarm will sound and the RED LED
will light if the equipment exceeds the current limit. Always check
Exit to previous menu
38 of 62