Supervisor Login; Logout - PROLEC PME200 User Manual

5.4 Supervisor Login

To login as a supervisor, either Login as described in section 5.3, use the supervisor key
switch (if fitted) or hold any Exit icon button down for three seconds and enter your code.
Logging out is described in section 5.5 or use the supervisor key switch. Logging in as a
supervisor is recorded in the system data log.
Cancel without change
Moves highlighter to
left or Hold to delete
digit
Accept displayed value

5.5 Logout

To select the logout screen, hold any Exit icon button down for three seconds. Once log-
out has been confirmed, the login screen will be automatically displayed. Press the Cross
icon button to stay logged in and return to previous screen.
Cancel without change
562200-000, Issue 1.2, December 2015
Increases highlighted
digit
Moves highlighter to
right
Decreases highlighted
digit
Confirm logout
14 of 62