Height Limit Setting - Known Height - PROLEC PME100 User Manual

7.1.2 Height Limit Setting - Known Height

Enter a value
Press the 'Enter a value' button
Cancel without change
Moves highlighter to
left/ Hold to delete digit
Accept displayed value
Use the UP and DOWN Arrow icon buttons to increase and decrease the highlighted
number. Use the LEFT and RIGHT Arrow icon buttons to move the highlighter to the left
and to the right.
that the limit activates at the set point. A limit cannot be deactivated when
close to or at the limit. Observe the operational limitations given in section 4.
562100-000, Issue1.1, December 2015
A known limit can be entered into the display. This is
the vertical height from the base or ground of the ma-
chine:
Once a limit is set, the internal alarm will sound and the RED LED
will light if the equipment reaches the current limit. Always check
Exit to previous menu
Increases highlighted
digit
Moves highlighter to
right
Decreases highlighted
digit
17 of 36