Table of Contents
Advertisement
6.2 Product Type Selection Menu (Optional)
This system can be configured for multiple Product Types. If more than one
Product is available, they will be manually selected via the product screen
shown below. Use the Arrow icon buttons to select the required product and
confirm using the Tick icon button, the system will restart automatically. En-
sure the correct equipment is fitted to the machine when selecting a product.
Example products are shown, please refer to the relevant product operator manual for
further instructions.
Exit without change
6.3 PME 2D Digging (Optional)
PME2D offers all the features expected from a 2D guidance product providing accurate
and quick grade control in common civil engineering applications. Pre-set profiles allow
you to dig to depth or grade to a known profile first time without under/over cutting, saving
you time, rework and excess material. Tool addition and measurement, choosing and
editing of slopes, cross sections, trenches and simple grading is simple to do all from the
display.
Any existing PME system can be upgraded to 2D digging with the addition of simple soft-
ware and hardware changes.
562100-000, Issue1.1, December 2015
Moves highlighter UP
Accept highlighted
system
Moves highlighter
DOWN
14 of 36
Advertisement
Table of Contents
