Table of Contents
Advertisement
Rammer
Continued from the previous page.
3. Install the clamp (f) and tighten the screw.
4. Hold the end of the fuel hose (e) near the fuel filter (c) and screw the fuel filter to
the fuel tank.
5. Install the clamp (d) at the fuel filter (c).
6. Remove 10 mm (3/8 in.) off the end of the hose (b). Connect the fuel hose (b) to
the fuel tank and install the clamp (a).
.
Result
The fuel tank has now been installed.
wc_tx004029gb_FM10.fm
Disassembly and Reassembly
f
10 mm
(3/8 in.)
wc_gr012666
65
a
b
c
d
e
wc_gr012660
Advertisement
Table of Contents
