Installing The Engine-Wm 80 - Wacker Neuson BS 50-4s, BS 50-4As Repair Manual

Rammer
4.26 Installing the Engine—WM 80
■ Torque wrench
Requirements
■ Loctite® 243
Procedure Perform the procedure below to install the engine.
To view an animation of this procedure, internet access
is needed.
To view the animation, click on the video icon or scan
the QR code with a smart phone.
1. Apply Loctite® 243 to the four screws (j) and fasten the engine (k) to the
machine. Torque the screws to 27 Nm (20 ft.lbs.).
This procedure continues on the next page.
wc_tx004029gb_FM10.fm
k
j
105
Disassembly and Reassembly
wc_gr012881