Table of Contents
Advertisement
Rammer
Continued from the previous page.
6. Remove the wire tie (p) fastening the low-oil shutdown switch wire to the lower
engine guard.
q
p
7. Remove the two screws (q) and remove the low-oil shutdown switch from the
lower engine guard (o).
8. Remove the four 20 mm screws (n) and the two 30 mm (m) screws and remove
the lower engine guard (o) from the machine.
9. With the aid of an assistant, support the engine and remove the two engine
mounting nuts (e).
10.Remove the engine (j) and the heat shield (k) from the machine.
t
Result
The engine has now been removed.
wc_tx004029gb_FM10.fm
j
n
n
o
111
Disassembly and Reassembly
k
m
e
wc_gr012896
Advertisement
Table of Contents
