Table of Contents
Advertisement
Disassembly and Reassembly
Continued from the previous page.
8. Install the throttle cable (d) to the engine and tighten the nut (c) and screw (b).
9. Apply Loctite® 243 to the two engine mounting nuts (e) and the two engine
mounting nuts on the opposite side of the machine. Torque all four engine
mounting nuts to 25 Nm (18 ft.lbs.).
10.Install the heat shield screw (a).
11.Install the carburetor. See topic Installing the Carburetor—Honda.
t
Result
The engine has now been installed.
a
e
114
Rammer
c
d
b
wc_tx004029gb_FM10.fm
wc_gr012894
Advertisement
Table of Contents
