Removing The Lifting Cable - Wacker Neuson BS 50-4s, BS 50-4As Repair Manual

Disassembly and Reassembly
4.9

Removing the Lifting Cable

Procedure Perform the procedure below to remove the lifting cable.
To view an animation of this procedure, internet access
is needed.
To view the animation, click on the video icon or scan
the QR code with a smart phone.
1. Remove the four socket head screws (b) and the two nuts (c).
2. Remove the brace (d) and the lifting cable (a).
Result The lifting cable has now been removed.
a
d
c
56
Rammer
b
b
wc_gr012672
wc_tx004029gb_FM10.fm