Table of Contents
Advertisement
Rammer
4.44
Installing the Spring System Cover—Spring Box Tool
■ Spring box tool P/N 5000081423
Requirements
■ Loctite® 243
■ New gasket
Background
There are two methods for installing the spring system cover: The preferred
method is using the special spring box tool P/N 5000081423. For those who don't
have the special tool, the hydraulic press method used.
Procedure
Perform the procedure below to install the spring system cover.
WARNING
Personal injury hazard. The spring system cover is under high pressure. If the
spring system cover is removed incorrectly, the springs can eject with enough force
to cause serious injury or death!
► Only remove the spring system cover using the hydraulic press or spring box
tool method.
To view an animation of this procedure, internet access
is needed.
To view the animation, click on the video icon or scan
the QR code with a smart phone.
This procedure continues on the next page.
wc_tx004029gb_FM10.fm
Disassembly and Reassembly
155
Advertisement
Table of Contents
