Door Open - Alarm Test; Battery Test - CME BodyGuard 595 Color Vision Operator's Manual

7.
Depending upon the set flow rate and pressure
threshold, the Down Occlusion alarm will be
activated.
Press
Door Open – Alarm Test
1. Insert a MicroSet
heard.

NOTE: for instructions on how to load and prime an administration set refer to
sections "Loading the Administration Set" & "Priming the Line".
Press until the Self-Test screen appears. If air sensor is off, press
2.
confirm. Please contact your technician in order to enable the air sensor if
disabled with no need.
3.
Start infusion as instructed in the "Select protocol" section.
4. Open the pump door.
5. Door Open alarm will be activated at once.
6.
Close the door and press

Battery Test

1. Insert a MicroSet
is heard.

NOTE: for instructions on how to load and prime an administration set refer to
sections "Loading the Administration Set" & "Priming the Line".
2. Take the pump out of the charger.
BodyGuard 595™Color Vision Operator Manual
to mute the alarm.
TM
in the pump and close the door. Press the door until a click is
.
TM
in the pump and close the door. Press the door until a click
REGIONAL 10:00 -
Down
Occlusion
Check Set / Access
Press key to mute
PCA 10:00
Door Open
Close door
4 – Operation
█
■
70%
to
█
■
- 70%
24