CME BodyGuard 595 Color Vision Operator's Manual page 7

BodyGuard 595™Color Vision Operator Manual
5. INFO
 Supplies information about the pump and its programs (see
Info Mode chapter).
 Pressing continuously locks and unlocks the keypad to
6. Numeric Keys
prevent accidental or deliberate change to pump operation.
Enters numeric parameters during programming
7. STOP/NO
 Stops infusion
 Silences an alarm condition
 Pause priming
8. START/ OK
 Zeroes the displayed value during programming
 Starts infusion
 Erases the last digit during programming
 Confirms selection and setting
 Returns to previous screen
9. BOLUS

Change bolus parameters during operation (this function is
normally performed using the remote bolus cable). Can
be disabled under Change Set Up.
 Activates clinician (CA) bolus when pump in STOP mode.
10. Arrows
 Scrolls up, down, right and left through options
1 – Introduction
7