Chapter 8 - Sender Bar Options - Garnet SeeLeveL Special 809-DM User Manual

CHAPTER 8 - SENDER BAR OPTIONS

T
he sender bar for an 809-DM can be either a 1/6" resolution bar
or a 1/10" resolution bar. The 1/6" bar is identified by an "810X"
in the serial number, for example 810X-99999. It must be paired
with the appropriate 1/3-1/6" float. The 1/10" bar is identified
by an "810HX" in the serial number, for example 810HX-99999.
It must be paired with the appropriate 1/10" float. Either sender
bar sends out the same 11 bit data format so there is no change
required at the display other than programming in the correct
volume calibration to match the resolution of the bar.
CAUTION: If the bar is being used with a display other than an
808PS2, 809-DM, OR 810PS2, contact your dealer or Garnet
Instruments before attempting to operate the bar in 1/6"
mode with the different display.
809-DM Manual
Page 25