Chapter 9 - Sender Bar Limits Of Resistivity - Garnet SeeLeveL Special 809-DM User Manual

CHAPTER 9 - SENDER BAR LIMITS OF RESISTIVITY

T
he temperature of the product being transported should be
limited to approximately +90°C (+194°F). Damage to the float
and sender bar can occur if this value is exceeded.
The tube used in the manufacturing of the sender bar is seamless
316 stainless steel. It should be noted that certain corrosive
products, as well as high concentrations of acid products, may
attack the stainless steel and cause perforations to develop.
It is the operator's responsibility to determine the products
compatibility with the sender bar.
WARNING: Perforation of the sender bar or heat damage is
not warrantable.
The Loctite products used to secure the end cap can be attacked
by certain chemicals as well. For reference, a chemical resistance
chart from Loctite showing product compatibility with various
chemicals can be found on the following pages.
The 680 retaining compound we specify is similar to Loctite #592,
567, 565, 569, 545, 580, 571, 242, 577, 572, 542, 565, 545, 243. If
you require more information, please call the Loctite Corporation,
in Canada, 1-800-263-5043, in USA, 1-800-562-8483.
Page 26 809-DM Manual