Chapter 5 - Sender Bar Limits Of Resistivity - Garnet SeeLevel Special 808-P2 Important Operator Information

CHAPTER 5 - SENDER BAR LIMITS OF RESISTIVITY

T
he temperature of the product being transported should be limited to
approximately +90°C (+194°F). Damage to the float and sender bar can
occur if this value is exceeded.
The tube used in the manufacturing of the sender bar is seamless 316
stainless steel. It should be noted that certain corrosive products, as well
as high concentrations of acid products, may attack the stainless steel
and cause perforations to develop. It is the operator's responsibility
to determine the products compatibility with the sender bar.
CAUTION: Perforation of the sender bar or heat damage is not
W
warrantable.
The LOCTITE® products used to secure the end cap can be attacked by
certain chemicals as well. For reference, a chemical resistance chart from
LOCTITE showing product compatibility with various chemicals can be
found in the center of the manual.
The 680 retaining compound we specify is similar to Loctite #592, 567,
565, 569, 545, 580, 571, 242, 577, 572, 542, 565, 545, 243. If you require
more information, please call the Loctite Corporation, in Canada, 1-800-
263-5043, in USA, 1-800-562-8483.
808-P2 Manual Page 11