Controller State Diagram - Newport CONEX-PP Series Gui Manual

CONEX-PP
EDH0350En1031 – 12/18
1.4

Controller State Diagram

The CONEX-PP controller is defined by the following state diagram.
Actions in each state when End of Runs is encountered
NOT REFERENCED: No action.
CONFIGURATION: No action.
HOMING:
MOVING:
READY:
DISABLE:
Only check at end of HOMING and then change to
NOT REFERENCED state.
Abort motion and then change to NOT
REFERENCED state.
Change to NOT REFERENCED state.
Change to NOT REFERENCED state.
2
Controller GUI Manual