SMC100CC & SMC100PP
SMC100
Single-Axis Motion Controller
1.0
Introduction
EDH0310En1030 – 01/17
1.1
Purpose
The purpose of this document is to provide instructions on how to use the
SMC100 Controller
1.2
Overview
The
SMC100 Controller GUI is a graphical user interface, that allows the user to
interact with the SMC100CC or SMC100PP controller that is connected to stages. The
user can initiate moves, change the state of the controller, adjust parameters, etc
graphical user interface (GUI)
1
Controller GUI Manual
.
.