Table of Contents
Advertisement
Setup Guide
7.1
MOUNTING THE UNIT
In a 19" rack
•
The PedalPro Ex is a standard 2U 19" module. Find a suitable space in
your rack and use the mounting screws provided.
On a flat surface
You can also rest your PedalPro Ex on a flat, dry, solid surface of sufficient size.
Avoid resting your PedalPro Ex on the floor – its mechanical and electrical
components may not withstand shocks from inadvertently kicking or stepping
Avoid overheating the unit by ensuring good ventilation. Make sure
that cooling apertures on the top and bottom panels are unobstruct-
ed. Avoid installing the PedalPro Ex directly above or below heat-
radiating devices, such as power amplifiers and tube gear.
7.2
CONNECTING TO THE MAIN
•
Use the power cord supplied to connect your PedalPro Ex to the main.
Plug one end of the cord into power connector 15 and the other end
into an earthed main socket.
The machine should have come to you with the switch already set
for the voltage currently in use in your country. Please check wheth-
7
er this is the case by inspecting the position of switch 17 on the
back panel. Use only VR supplied power cords. Vintage Revolution
cannot be held responsible in the case of ensuing malfunctioning or
failure.
7.3
CONNECTING YOUR INSTRUMENT
•
Connect your instrument to the input jack [22] on the rear panel.
If you connect your guitar or another instrument when the PedalPro
Ex is on, first turn your amplifier(s) off, or press the Soft Mute key 9.
The yellow light on the Soft Mute key 9 indicates that the processor is
now muted. You should also do this when switching instruments.
7.4
CONNECTING AMPS / MIXERS
Mono set-up
The diagram below shows you how to connect the PedalPro Ex to a mono
power amplifier, a mixer using a mono input, or a mono amp/speaker rig.
External pedal
(optional)
EXT. EFFECT
RETURN
IN
È1/4
Play:
C mp
o
PedalPro
Connect a single mono instrument cable between the OUTPUT LEFT
•
(mono) connector [20a] of the PedalPro Ex and the input of your ampli-
8
←
←
OUTPUT
LEFT
(mono)
EXT. EFFECT
SEND
0 0
0ÇP
u
reP
h
a
s
er
Dist Ng e t
Tr
em
OFF
ON
(
)
TM
OFF
ON
Advertisement
Table of Contents
