Table of Contents
Advertisement
How to Use Your PedalPro Ex: Presets
Use the selection dial [4] or the UP and DOWN arrow keys [3b, 3c] to
•
scroll through the presets until you find the preset you want to explore
(the preset will be pointed at by the arrow next to the word 'List' on the
screen).
Press Page - [11] or Page + [12] to move through the four pages of the
•
main menu until the effect you want to explore appears on the bottom
line of the screen.
Press the multifunction key [10] corresponding to the effect's configura-
•
tion page(s). The settings for that effect in the preset will now be visible.
See the section 'Working with single effects' for an explanation of all the
effects parameters.
To exit the effect's menu pages, simply press EXIT [7]. You will return to the
•
main menu.
9.1.4 Editing a preset
Parameter or switch?
Before editing your presets it's important to first understand the difference
between two PedalPro Ex functions: the switch and the parameter.
A switch is indicated with the symbol
name. This indicates that the function can be directly switched on (
(
Â
) using one of the multifunction keys 10, without entering into Edit Mode.
A parameter is indicated with the symbol
adjusted by entering into Edit Mode.
To edit a preset you must first load it, i.e., enter
•
•
Press Page - [11] or Page + [12] to scroll through the four pages of the
9
main menu, until you see the page where the effect you want to edit is
indicated on the bottom line of the display.
Press the multifunction key [10] corresponding to the effect you want to
•
modify to enter the effect's menu.
•
To change the parameters of that effect, press EDIT [5]. You are now in
Edit Mode.
placed after the function or effect
Ç
Á
) or off
. This indicates that it can only be
:
Play
Mode.
Use the selection dial [4] to modify the values of the parameters (indi-
•
cated by the blinking cursor). Move between parameters using the arrow
keys [3]. The sounds produced by your PedalPro Ex will change in real
time as you modify each parameter.
•
Turn the effect's features on or off simply by pressing the appropriate
multifunction key [10]. Please refer to the section
Ex's
effects', on page 19, for a detailed explanation of the features of
each effect and how to access them.
•
Once you are happy with how the effect sounds, press EXIT [7] to exit
from the parameters page and return to the list of presets.
The preset list will now look like this:
È1/5
Play:
0 0
C mp
o
Bst Pre Ngte
The header 'Edit' and the asterisk (
the PedalPro Ex configuration for the loaded preset has been modified, but
not yet saved in a preset.
You will also note that, for as long as the asterisk is present, you are not able
to scroll through the list of presets using either the selection dial [4] or the UP
and DOWN arrow keys [3b, 3c]. These functionalities will remain locked until
the modifications to the preset are either saved or discarded.
To save changes to the preset, press SAVE [5] and confirm 'yes' by press-
•
ing ENTER [6].
To discard the changes, press EXIT [7] again and return to Play Mode.
•
14
'Working with PedalPro
0ÇP
u
reP
h
a
s
er
*
) after the preset's number indicate that
Advertisement
Table of Contents
