Vintage Revolution PedalPro Ex Owner's Manual page 71

Table of Contents

Advertisement

Expression pedals assignment.
If you press down any of the expression pedals, a corresponding LED on top
the expression pedal will turn ON or OFF to change the expression pedal
status.
Expression Pedal 1 is assigned to Wah when it is engaged and to Synch Wah
when it is disengaged.
Expression Pedal 2 is assigned to Volume when it is engaged and it is as-
signed to any of the expression control parameter
disengaged mode. If no expression control parameter is selected then Detph
Tremolo is assigned.
Favourite mode
Hold down the Arrow Down button until the red display on the FC-300 shows
FA
. Remove your foot. You have just entered the favourite mode (LED Arrow
Down button is ON). You can navigate with the Arrow buttons through the 18
favourite presets. To deactivate Favourtite mode hold down the Arrow Down
ALL
button til the red display shows
.
Tuner mode.
Hold down the Arrow Down button until the diplay shows
Tune your guitar and press shortly the Arrow Down button to return to play
mode.
FA
000
Preset Number
Favourite mode
(see ADES
9.1.9) when it is
---
tuners infos.
---
Tuner mode
71
PedalPro Ex and FC-300
If your are in Favourite mode :
ALL
00
Favourite preset
Switch to normal mode
FC-300 extensions switches
If you install external switches via CTL (3,4) CTL(5,6) and CTL(7,8) you can
have more controls.
CTL(3,4) are used for GREEN/RED mode and setting/resetting Tap Tempo.
CTL(5,6) are used for AMP switch 1 and 2.
CTL(7,8) are used for AMP switch 3 and 4.
---
Tuner mode

Advertisement

Table of Contents
loading

Table of Contents