Post Effects - Vintage Revolution PedalPro Ex Owner's Manual

9.4

POST EFFECTS

The post effects include all the BBD based effects like chorus, flanger and
delay and post loops (AUX SEND/RETURN).
All post effects are entirely analogue and designed using the most ad-
vanced analogue components, ensuring an unbeatable sound quality. Plus,
with an expression pedal connected via a MIDI Foot Controller, you can con-
trol - while you play - fundamental parameters including the Wet/Dry ratio,
the Delay time, the Delay feedback delay, the Flanger feedback and many
more (see the MIDI section on page 49-50).
For those who need to add an external stereo digital effect or two extra
analogue pedals at the end of the effect chain (just before volume control
and noise gate) the PedalPro Ex features a set of stereo AUX send/return
connectors. If you use a digital external processor, the internal preamplifiers
and mixers will allow to match the signal dynamic of your external effect up
to +7dBu and to benefit of a full analog path of your unprocessed signal. In
this way, with the mixing ratio under your control, the analogue quality and
harmonic richness of your sound is always preserved.
The post effects include the following effects/modules:
1. Chorus;
2. Flanger;
3. Chorus and Vibe;
4. Delay with left/right routing options;
5. De-tuner for modulating the delay;
6. Auxiliary (AUX) mixer, providing additional loop options.
envelope
detector
IN
preamp external
buffer compressor boost
Ddream pedal
envelope
detector
The post effects of your PedalPro Ex are at the end of the PedalPro Ex's effect
chain, just before stereo volume controls and noise gates.
post
effects L
OUTPUT
volume noise
phaser filter F1
control
gate
(mono)
LEFT
panner /
post
tremolo
effects R
RIGHT
OUTPUT
volume noise
filter F2
control gate
POST EFFECTS ROUTING OPTIONS
The following routing configurations are available for the effects of the ex-
pansion board. The routing can be changed by accessing the Delay con-
figuration menu (see section below).
post
effects L
LEFT
=
post
effects R
RIGHT
Fig. 9-2. Post effects with the delay on the left channel.
post
effects L
LEFT
=
post
effects R
RIGHT
Post effects with the delay on the right channel.
Fig. 9-3.
Working with your post effects
The Chorus, Flanger and Delay configuration menus are accessible from
page 3 of the main menu, where two options are available: 'ChFl' and 'Dly'.
LEFT
È3/5
Play:
RIGHT
C Fl h
41
chorus / flanger aux
delay
or chorus&vibe left
aux
right
chorus / flanger aux
or chorus&vibe left
aux
delay
right
0 0 0Ç P u rePh a er s
Dly DSP Ext
Post Effects
9