Table of Contents
Advertisement
Fbk – Feedback control. Range: 0-100%
The Fbk parameter controls the amount of delayed signal that is fed back
into the Delay effect.
To change the feedback level of the Delay, press EDIT [5]. Use the arrow
•
keys [3] to position the blinking cursor next to Fbk. Adjust the value with
the selection dial [4].
PAGE 3/3 - MODULATION CONFIGURATION
By modulating the clock of the BBD delay stages, you can produce a shim-
mering delay that simulates vintage tape delays. To use this feature you must
first configure the Delay using the parameters on page
and then activate and adjust the Detuner on page 3/3.
Modulation Ç Á
Speed: 02 . 0 0
Depth: 01 . 8 8
Modulaiton– Range: on (
Á
), off (
Â
)
When on this page, press the BYPASS EFFECT 1 key [10a] to switch the
•
Delay modulation (
Á
) or off (
Â
).
Speed – Speed of the modulation Range: 0-100%
•
To change the speed of the Detuner, press EDIT [5]. Use the arrow keys
[3] to position the blinking cursor next to Speed. Adjust the value with the
selection dial [4].
Depth – Depth of the modulation. Range: 0-100%
•
To alter the depth of the modulation effect, press EDIT [5]. Use the arrow
keys [3] to position the blinking cursor next to Depth. Adjust the value
with the selection dial [4].
1/3
and page 2/3,
È
3/3
47
9.4.4 AUX Connections (Post-loop)
On
page 3
of the main menu the user can access the configuration for the
external effects loop (pre-loop, see
section
loop (post-loop). If no cables are plugged into the AUX SEND and AUX RE-
TURN , the AUX mixer is routed internally to the DSP boards.
The AUX SEND and AUX RETURN [16a to 16d] jack connectors can be used
for connecting either up to two external stomp box pedals (see
9-9, and
Fig.
9-10) or a DSP effect unit (see
chain before the Noise gate and the Volume controls.
Like in the pre-loop, the post-loop connections are controlled by internal
relays that electrically connect and disconnect the external effects to your
post-loops according to the Aux type parameter which is part of your sound
preset definition. Therefore in one sound preset your external effect may be
part of your sound effect chain, while in another sound preset your external
effect is true bypassed.
ACCESSING POST LOOP OPTIONS
•
On
page 3
of the main menu, press the multifunction key [10d] labelled
'Ext'.
È3/5
Play:
0 0
0Ç
C Fl
h
Dly
Post Effects
7.6, on page 10) or the AUX
Fig.
9-8,
Fig.
Fig.
9-11) at the end of the audio
P
u
rePh
a er
s
DSP Ext
9
Advertisement
Table of Contents
