Table of Contents
Advertisement
Post Effects
Page
1/3(Ext. effects, AUX type) activates and selects the post-loop routing.
Page 2/3
(AUX mixer) defines the settings for the auxiliary mixer*.
•
To switch between the two pages of the External Effects and AUX Mixer
loops configuration menu, press Page - [11] or Page + [12].
PAGE 1/3 - AUX TYPE
On this page you can select which loops are enabled - and their position in
the effects' chain - as well as the routing of the post-loop(s) connected to
the auxiliary jack connectors AUX SEND and AUX RETURN [16a to 16d].
E t x
_
4 C b e l (global)ÇÂ
a
A x u
Aux Type – Auxiliary loops routings. Range: none (all off), LoopL>OutL,
LoopR>OutR, LoopL&R>Out, Aux + Mixer
The Aux type parameter allows you to decide how to route the post loop(s)
connected between the AUX SEND jacks [16a and 16b] and the AUX RETURN
jacks [16c and 16d]. The diagrams in the next page of this manual will present
an overview of the different routing options that can be selected.
The main difference with the loop between the EXT. EFFECT jacks is that the
AUX SEND and RETURN jacks are positioned at the end of the effect chain,
just before the output level control and the Noise Gate (see
makes the AUX loops ideal for connecting reverberation effects and other
modulation effects. The routing options are shown in the next page.
•
To set the available delay range, press EDIT (5). The cursor will blink di-
rectly next to AUX type. Adjust the value with the selection dial [4].
* Aux_type on page 1/2 must be set to 'Aux + Mixer' in order to activate the auxiliary mixer.
e
f f ec
t
ÇÂ
È1/3
t
p y e:
L
oo
p_L>OutL
section
AUX LOOPS ROUTING OPTIONS - AN OVERVIEW
This figures below show the AUX loop (post-loop) routing options. These can
be selected by adjusting the parameter Aux type on page
nal effects configuration menu.
SEND
AUX
RETURN
LEFT
=
SEND
AUX
RETURN
RIGHT
Fig. 9-7. Aux type: none
LEFT CHANNEL
RIGHT CHANNEL
Fig. 9-8. Aux type: LoopL > OutL
LEFT CHANNEL
RIGHT CHANNEL
9.4). This
Fig. 9-9. Aux type: LoopR > OutR
LEFT CHANNEL
RIGHT CHANNEL
Fig. 9-10. Aux type: LoopL&R > Out
48
SEND ►
RETURN
LEFT CHANNEL
SEND ► RETURN
RIGHT CHANNEL
external
effect(s)
AUX RETURN
AUX SEND
LEFT
LEFT
in
out
AUX SEND
AUX RETURN
RIGHT
RIGHT
in
out
external
effect(s)
external
external
effect(s)
effect(s)
AUX SEND
AUX RETURN
AUX SEND
LEFT
LEFT
RIGHT
in
out
in
out
1/2
of the Exter-
AUX RETURN
RIGHT
Advertisement
Table of Contents
