Table of Contents
Advertisement
How to Use Your PedalPro Ex: Presets
9.1.8 Copy settings of a preset
This feature allows you to copy some specific settings of a known preset into
the one you are editing.
Press the Page - [11] or Page + [12] to go to page 5/5 of the main menu.
•
Press the multifunction key [10d], labelled 'Copy' on the display.
•
Copy settings
What? Delay
From: 003-DumbleDrive1
If you wish to copy the delay settings from your DumbleDrive sound select De-
lay in the list of what to copy and browse the preset list till you find the preset
you wish to copy from. Press Enter when you are ready and the settings will be
instantly uploaded in your preset.
What can you copy ?
1) GroupSolo - All the settings that are generally used for solo and includes Compressor,
Boost, Preamp, NoiseGate, Amp switching settings.
2) Compressor
3) Boost
4) Preamp
5) Tremolo settings
6) Phaser settings
7) Filter settings
8) Delay - All the delay settigns including the modulation parameters
9) Chs/Fls - All the Chorus/Vibe/Flanger settings
10) Aux/Ext - All the settings of the pre and post loop excluding the amp switches
11) Dsp settings
12) Tempo&Rou - All the settings used for the Tap Tempo and the Midi routing
9.1.9 ADES
The ADES connector allows for the following type of data communication:
•
standard MIDI in,
•
ADES bidirection protocol for Pedalino
•
bidirectional Sysex for Roland FC-300
On page 5/5 press the multifunction key [10d], labelled 'ADES' on the
display.
A E D S controls
ExprCtrl: 01 Ç Vowels
SwellType: FxMax
SwellType - assignes the expression volume function. Select your expression
function between the following 4 function: FxMax, FxFre,FxSft,FxLin. Swell-
type is a global parameter and is used for MIDI,ADES and SYSEX.
ExprCtrl (Expression control) - assigns the expression pedal of the Pedalino
or FC-300 to a specif parameter as listed in the next page.
16
È1/2
A
Advertisement
Table of Contents
