Table of Contents
Advertisement
Working with Effects: Volume Controls
9.3.8 Volume Controls
PedalPro Ex™ has stereo, channel-independent post Volume Controls that
give you tight, precise control of what goes into your amplifiers. When you
use them as a volume pedal, the left and right volumes are assigned to the
same MIDICC#71
PARAMETERS
•
To enter the Volume configuration page, press the multifunction key
L v e
e
LvL
: 0
Level_cnt – Volume controls effect switch. Range: on (
Á
•
To enable (
) or disable (
and right channel in your effect chain, press the BYPASS EFFECT 2 key
[10c].
LvL – Volume control, left channel. Range: 0-100%
This parameter controls the total output level on the left channel.
To change the total output level of PedalPro Ex's left channel, press EDIT
•
[5]. Use the arrow keys [3] to position the blinking cursor next to LvL. Ad-
just the value with the selection dial [4].
LvR – Volume control, right channel. Range: 0-100%
This parameter controls the total output level on the right channel.
•
To change the total output level of PedalPro Ex's right left channel, press
EDIT [5]. Use the arrow keys [3] to position the blinking cursor next to LvR.
Adjust the value with the selection dial [4].
l
c _ nt
ÇÁ
È1/1
0 4
.
0
LvR 069. 0
:
Á
), off (
Â
Â
) the analogue Volume Controls for the left
)
40
Advertisement
Table of Contents
