Activating And Configuring A Timer Programme For Heating - DeDietrich EASYLIFE ALEZIO S V200 User Manual

Fig.24
MW-6000861-02
Fig.25
MW-6000874-1
Tab.21
Operating mode
Programming
Manual
Temporary temperature change
Holiday
Frost protection
5.6.2

Activating and configuring a timer programme for heating

Fig.26
MW-6000861-02
Fig.27
MW-6000880-1
Fig.28
MW-6000862-2
7748661 - v04 - 01022022
2. Press the
3. Select Operating mode.
4. Select the desired operating mode:
Description
The room temperature is regulated according to the selected timer programme.
Recommended mode.
The room temperature is constant.
The room temperature is forced for a defined period.
The room temperature is reduced during an absence period to save energy.
The selected zone within the installation is protected from frost in winter.
A timer programme can be used to vary the room temperature in a living
zone depending on activities during the day. This can be programmed for
each day of the week.
1. From the home screen, access the screen for the relevant zone.
2. Press the
3. Select Time programmes heating.
Three timer programmes are available. The programme that is
currently active is marked with a tick.
4. To activate another timer programme, select ZoneTimeProg Select.
5. To change the timer programming, select the programme you wish to
change.
The programmed activities for Monday are displayed.
The last activity of the day remains active until the first activity of the
following day.
6. Select the day to be modified.
button.
button.
5 Operation
MIV-S V200 23