Safety Sides - Park House Healthcare RICHMOND ULTRA LOW BED Service Manual

Safety sides

The safety sides on this bed are integral to this bed. Locate the sleeves into the cylindrical
mounting brackets. Push in the side rail and tighten the handscrews. Secure the
handscrews by tightening up the top nut.
To lower the safety side:
1. Hold the top bar,
2. Pull the quick release pin downwards,
3. Slide the safety side towards the foot end of the bed,
To raise the safety side:
1. Hold the top bar,
2. Slide the safety side up towards the head end of the bed until it locks into position,
WARNING! Extra care should be taken when lowering the safety sides,
keeping fingers and limbs clear of the moving parts of the bed
CAUTION! Do not use the safety sides to move or lift the bed
Richmond Ultra Low Bed – Service Manual
12