Park House Healthcare RICHMOND ULTRA LOW BED Service Manual page 30

Richmond Ultra Low Bed – Service Manual
Install
1. Reconnect the CPR cable into the actuator and secure the lid by pressing down firmly
2. Place the actuator into position under the bed
3. Insert the bolts through the gas strut, beds brackets and the actuator and secure
with the nut
4. Place the cable into the trunking and then secure the top back on the trunking
5. Reconnect the actuator to the control box and then secure with the security clip
6. Connect the bed to the mains power
7. Test the functionality of the actuator
26