Installing The Shock Isolators On The Motorola Mounting Brackets - Motorola RD5000 Integrator Manual

2 - 6 RD5000 RFID Integrator Guide

Installing The Shock Isolators on The Motorola Mounting Brackets

CAUTION
Attach the shock isolators (provided with the reader) to the mounting brackets (using the post side of the shock
1.
isolator) with the provided nut and lock washer. Center the shock isolator post in the mounting hole and tighten
the nut. Repeat the shock isolator mounting procedure for all four shock isolators.
Mounting the Shock Isolators
Figure 2-5
The mounting brackets are ready to accept the RD5000 RFID reader. Proceed to
2.
page 2-9.
The shock isolators are required. Do not mount the unit without the shock isolators.
When permanently mounting the shock isolators use the lock washers between the nut and the
mounting bracket, as shown in Figure 2-5.
Shock Isolator (4)
Lock Washer (4)
Nut (4)
Mounting Bracket (2)
Mounting The Reader on