Trace Route Window; Known Aps Window - Motorola RD5000 Integrator Manual

Trace Route Window

traces a packet from a computer to a host, showing how many hops the packet requires to reach the
Trace Route
host and how long each hop takes. The
The window allows testing a connection at the network layer (part of the IP protocol) between the
Trace Route
reader and any place on the network.
To open the
Trace Route
Trace Route Window
Figure 5-42
Enter an IP address or a DNS Name in the IP combo box, and click
information shown in the
all routers between the reader and the destination. The Round Trip Time (RTT) between the reader and each
router appears, along with the total test time. The total test time may be longer than all RTTs added together
because it does not only include time on the network.

Known APs Window

The window displays the APs in range using the same ESSID as the reader. This window is only
Known APs
available in
Infrastructure
window.
Known APs Window
Figure 5-43
Trace Route
window, click in the
Trace Route
window's IP combo box. When starting a test, the trace route attempts to find
ICMP Ping
mode. To open the
Known APs
utility identifies where the longest delays occur.
window.
Wireless Diagnostics
. The IP combo box should match the
Start Test
window, click
Known APs
Wireless Applications 5 - 33
in the
Wireless Diagnostics