Copying Components To The Script; Saving The Script; Building The Image - Motorola RD5000 Integrator Manual

Copying Components to the Script

Script contents are managed using standard file operations such as
added to the script by clicking files and folders in the
The window supports standard windows; multiple files may be selected by clicking while holding the
File Explorer
or keys.
SHIFT CTRL

Saving the Script

Modifications to a script file can be saved using the
script writes over the original script. To use a Motorola-supplied standard script as a base and save the changes in
a new script, use the
Save As

Building the Image

Once the script is created, the hex image defined by the script can be built.
As part of the build, TCM performs a check on the script which verifies that all files referenced in the script exist.
This check is important for previously created scripts to ensure that files referenced in the script are still in the
designated locations.
To build scripts:
Click on the TCM toolbar. The
1. Build
Configure Build Window
Figure 6-10
Select the items (partitions) to build using the check box(es) to the left of each named partition.
2.
The defines where to store all built partitions.
3. Build Path
Select (hex image) COMPRESSION to reduce the size and speed up the download.
4.
Click and follow the on-screen instructions.
5. OK
If one of the partitions being built is the ESSID, a prompt appears requesting the ESSID value. Deselect the
HR (High Rate) check box when building ESSID images for a device with an FH radio.
File Explorer
Save
function.
Configure Build
Application Deployment for WinCE 5.0 6 - 15
,
New Folder Delete
window and dragging them to the
or the function. Saving changes to an existing
Save As
window appears.
and . Items can be
Rename
window.
Script