Motorola RD5000 Integrator Manual page 44

2 - 10 RD5000 RFID Integrator Guide
Slide the reader under the mounting bracket far enough to clear the external antenna terminating resistor and
2.
lower the reader onto the shock isolators.
External Antenna
Terminating Resistor
Mounting the RD5000 RFID Reader
Figure 2-8
Slide the reader over the shock isolators to align the shock mount holes with the reader mounting holes.
3.
If the holes do not align properly loosen the nuts at the bottom of the shock isolators and move the shock
4.
isolators to properly align the holes.
When the holes are properly aligned, insert the allen head screws, and finger tighten.
5.