Chapter 1 Getting Started
Introduction
This chapter provides an overview of the RD5000 RFID reader, explains how to charge the battery and how to start
the reader.
Figure 1-1 on page 1-2
reader ports and connectors.
A list of the accessories is provided in
Unpacking the Reader
Carefully remove all protective material from around the reader and save the shipping container for later use.
Verify that all equipment was received:
•
RD5000 RFID reader
•
Lithium-ion battery
•
Shock Isolators and mounting hardware
•
QRG (Quick Reference Guide)
Inspect the equipment for damage. If any equipment is missing or if any equipment is damaged, contact the
Symbol Technologies Support Center immediately. See
provides the reader parts location and
Table 1-1
lists the reader ports and connectors.
Table
1-2.
Figure 1-2 on page 1-3
Service Information on page xvi
provides the locations of the
for contact information.